JLG 600SC_660SJC ANSI Service Manual - Manual (Page 13)

SECTION 1 - SPECIFICATIONS
3120794 – JLG Lift – 1-1
SECTION 1. SPECIFICATIONS
1.1 CAPACITIES
Fuel Tank
39 US. Gallons (147.6 l)
Hydraulic Oil Tank
31 U.S. Gallons (117.3 l) with 10% air space
Hydraulic System (Including Tank)
37.2 U.S. Gallons (140.8 l)
Engine Crankcase
Deutz F4M1011F Diesel w/Filter - 11 quarts (10.5 l)
1.2 COMPONENT DATA
Engine - Diesel (Liquid-Cooled)
Manufacturer/Model- Deutz F4M1011F.
Oil Capacity.
5 Quarts (4.5 l) Cooling System.
11 Quarts (10.5 l) w/Filter.
16 Quarts (15 l) Total Capacity.
Low RPM - 1800.
High RPM - 2800.
Alternator - 60 Amp, belt drive.
Battery - 1000 Cold Cranking Amps, 210 Minutes
ReserveCapacity, 12 VDC.
Fuel Consumption.
Low RPM - 1.90 GPH (7.19 lph).
High RPM - 2.50 GPH (9.46 lph).
Horsepower - 65 @ 3000 RPM, full load.
Engine - Diesel. (Water-Cooled)
Swing System
Swing Motor Displacement - 4.62 cu. in. (75 cm3]).
Swing Brake - Automatic spring applied hydraulically
released disc brakes.
Swing Hub Ratio - 50:1.
Hydraulic Gear Pump. (at 1800 RPM)
7.9 GPM (29.90 lpm).
Pump Displacement - 1.02 cu. in. (16 cm3]).
Clockwise Rotation.
Auxiliary Power Pump
2.6 GPM (9.84 lpm) @ 1200 PSI. (82.7 BAR.
Pump Displacement - .244 cu. in. (14 cm3]).
DC Motor.
Clockwise Rotation.
Hydraulic Filter - In-line.
Return - Bypass Type.
10 Microns Absolute.
Charge.
10 Microns Absolute.
Hydraulic Strainers (In Tank).
30 Microns.