JLG 40H Parts Manual - Manual (Page 270)

3-4 3120241
SECTION 3 BOOM S
E
C
T
I
O
N
3
B
O
O
M
63 0641407 Bolt 1/4"-20NC x 7/8" 8
64 4751400 Flatwasher 1/4" 21
65 4060568 Shield 2
66 4340413 Support, Line 3
67 4300042 Stud (Welded on Part) 6
68 to 70 Not Used
71 2220343 Fitting, Straight 1
72 2751150 Hose 1
73 2220372 Fitting, Straight 1
74 4280018 Strip, Rubber 3 ft.
75 1320037 Clamp, Hose 2
76 0100020 Sealant, Pipe (Not Shown) A/R
77 4280242 Strip, Reinforcement 1
78 Not Used
79 Cable Electrical - 12/4 A/R
1060012 40H (Prior to S/N 52885) 57.3 ft.
1060515 40H (S/N 52885 to Present) 57.3 ft.
1060012 46H/40H+6 (Prior to S/N 52885) 69.3 ft.
1060515 46H/40H+6 (S/N 52885 to Present) 69.3 ft.
80 Not Used
81 0641510 Bolt 5/16"-18NC x 1 1/4" 2
82 4761500 Lockwasher 5/16" 2
83 3311501 Nut 5/16"-18NC 2
84 4711500 Flatwasher 5/16" 2
85 1380124 Clip, Retainer (March 1995 to June 1995) 6
86 4920986 Wire, Mechanics (March 1995 to June 1995) A/R
87 3340453 Pad, Wear 1
88 4070508 Shim A/R
4070551 Shim (800 LBS. Capacity with Hydraulic Controls) A/R
89 4070507 Shim A/R
4070552 Shim (800 LBS. Capacity with Hydraulic Controls) A/R
90 4761600 Lockwasher 3/8" 2
91 0641608 Bolt 3/8"-16NC x 1" 2
92 to 95 Not Used
96 3520029 Plug, Hole 2
97 1670836 Cover, Boom (S/N 34483 to Present) 4
BOOM ASSEMBLY OPTIONS: (VARIABLE PARTS) Ref.
0800379 STANDARD 40H WITH STANDARD CONTROLS Ref. 28
0800707
800 LBS. CAPACITY 40H WITH STANDARD CON-
TROLS
Ref. 7
0801098
800 LBS. CAPACITY 40H WITH HYDRAULIC CON-
TROLS
Ref. 3
0800578 STANDARD 40H WITH HYDRAULIC CONTROLS Ref. 14
0800504
46H/40H+6 WITH STANDARD CONTROLS (NOT
SHOWN)
Ref. 9
101 Base Weldment Options: 1
0800378 Standard 40H with Standard Controls
0800706 800 LBS. Capacity with Standard Controls
FIGURE 3-1. 2 SECTION BOOM ASSEMBLIES (CONTINUED)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.