Eppendorf Excella E-24R Benchtop Incubator Shakers - Manual (Page 17)

17
New Brunswick Operating Manual
5.1.4 Status Indicators
Four status indicator lights are located to the left of the
LED DISPLAY . They are:

SET Indicates that the shaker is in the SET MODE ,
when setpoints are being displayed and can be
altered. This is activated by the
SELECT key
or by pressing the (UP) or (DOWN) KEY .

POWER Illuminates and blinks during power up or if
power is interrupted during a run. Press the
SELECT key and change to another function to
turn off this indicator.

HEAT Illuminates to indicate that the heater is on.

TIME Indicates that the timer is in operation. The
shaker can be programmed to run for a preset
time from 0.1 to 99.9 hours. The timer can be
disengaged without stopping an ongoing run.
5.1.5 Function Indicators
Four function indicator lights are located to the right of the
LED DISPLAY . They indicate
the current parameter(s) being displayed:
 C Interior chamber temperature. Can be set from
4°C to 60°C, when in
SET MODE , using the
(UP) or (DOWN) KEY . It indexes at 0.1°C
increments unless the key is pressed for 4
seconds, after which it indexes more rapidly.

RPM Revolutions per minute. When in SET MODE ,
use the (UP) or (DOWN) KEY to change the
speed. It indexes at 1 RPM increments unless
the key is pressed for 4 seconds, after which it
indexes more rapidly.