3 safety, 1 intended use, 2 user profile – Eppendorf PiezoXpert User Manual
Page 8: 3 information on product liability, 4 warnings for intended use, Eppendorf piezoxpert™ — operating manual, Operating manual
Eppendorf PiezoXpert™ — Operating manual
8
3
Safety
3 Safety
3.1 Intended use
The PiezoXpert supports micromanipulation and microinjection in research. The PiezoXpert is
intended exclusively for indoor use.
3.2 User profile
This device may only be operated by trained and skilled personnel.
Before using the device, read the operating manual carefully and familiarize yourself with the
device's mode of operation.
3.3 Information on product liability
In the following cases, the designated protection may compromise the safety of the device.
Liability for material damage and personal injury is transferred to the operator:
•
The device is not used in accordance with the operating manual.
•
The device is used outside of its intended use.
•
The owner has made unauthorized modifications to the device.
3.4 Warnings for intended use
WARNING!
WARNING! Damage to health from toxic, radioactive or aggressive chemicals as
well as infectious liquids and pathogenic germs.
Observe the national regulations for handling these substances, the biological
security level of your laboratory, the material safety data sheets and the
manufacturer's application notes.
Wear personal protective equipment (PPE).
WARNING!
WARNING! Lethal voltages inside the device.
Ensure that the housing is always closed and undamaged so that no parts inside
the device can be contacted by accident.
Do not remove the housing of the device.
Do not allow any liquids to penetrate the inside of the housing.
Do not allow the device to be opened by anyone except service personnel who have
been specifically authorized by Eppendorf.
WARNING!
WARNING! Electric shock due to damage to device or mains cable.
Only switch on the device if the device and mains cable are undamaged.
Only use devices that have been properly installed or repaired.
In case of danger, disconnect the device from the mains supply.
WARNING!
WARNING! Risk from incorrect supply voltage
Only connect the device to power supplies which correspond with the electrical
requirements on the nameplate.
Only use sockets with a protective earth (PE) conductor and a suitable mains cable.
EN
Operating manual