Eppendorf PiezoXpert - Manual (Page 10)

Eppendorf PiezoXpert™ — Operating manual
10
4 Installation
4 Installation
4.1 Selecting the location
Please select the location for the PiezoXpert according to the following criteria:
•
Mains connection (230 V/120 V/100 V) according to the name plate. This is located on the
rear side of the device.
•
At least 10 cm away from adjacent devices and walls.
•
Solid bench with stable, horizontal and even work surface.
4.2 Installing the actuator on the micromanipulator
The actuator is mounted on the micromanipulator in the same manner as the capillary holder.
NOTICE!
NOTICE! Damage to the actuator.
Impacts or vibrations can cause the piezo element to malfunction or fail.
Do not allow the actuator to fall.
Do not expose the actuator to strong vibrations.
If you suspect the actuator has been damaged, have it inspected by Eppendorf
Service.
NOTICE!
NOTICE! Damage to the piezo element.
The piezo element may become damaged if is twisted.
It may only be rotated on the knurled screws.
Do not use the piezo element as a lever.
Hint!
When the actuator is mounted for the first time, the micromanipulator must be converted
or realigned as necessary. Follow the instructions in the operating manual of your
micromanipulator.
EN
Operating manual