Eppendorf PiezoXpert - Manual (Page 26)

Eppendorf PiezoXpert™ — Operating manual
26
8.4 Interfaces
8.5 Piezo impulse parameters
Technical specifications subject to change.
USB Only for Technical Service.
RS232 Currently non-functioning.
NOTICE!
NOTICE! Material damage from incorrect connections.
Only electrical connections may be made to devices described in the operating
manual.
Other connections are permitted only following consultation and agreement with
Eppendorf AG.
Only devices which comply with safety requirements according to IEC 60950-1 may
be connected.
Intensity (Int.) 1 to 50
•
1–22 can be set in increments of 1
•
22–50 can be set in increments of 4
Speed (Speed) 1 to 10
•
1–10 can be set in increments of 1, 1 Hz per step
Quantity (Pulse) 1 to 10, ∞
•
1–10 can be set in increments of 1
Clean function
Intensity (Int.) 1 to 86
•
1–22 can be set in increments of 1
•
22–86 can be set in increments of 4
Clean function
Speed (Speed) 1 to 40
•
1–40 can be set in increments of 1
•
1–10: 1 Hz per step, 10–20: 2 Hz per step, 20–34: 5 Hz
per step, 34–40: 25 Hz per step
EN
Operating manual