Advance Adapters 715596 - Manual (Page 7)

ADVANCE ADAPTERS INC. P/N: 715596
P.O. Box 247, 4320 Aerotech Center Way New Item: (11/10)
Paso Robles, CA 93447 PAGE 7 of 7
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 10-11-10
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your
conversion, we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of
Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other
related equipment. These manuals are normally available at automotive dealerships and parts stores.
JKCABLE SHIFT LINKAGE UPGRADE KIT
Loosely attach the cable to the shifter housing. Bolt the housing to the floor with the stock nuts. Install the new heim joint to
the cable and secure it with the jam nut. Adjust the linkage as shown in the drawing. Bolt the heim to the new lever assembly
with the 1/4"-20 x 1" H.H.C.S. and locknut.
Shift the transfer case to ensure the cable is adjusted correctly and that you have all transfer case ranges.
Reattach the transfer case shifter cover. Reinstall the console and shifter knob.