Advance Adapters 715596 - Manual (Page 5)

ADVANCE ADAPTERS INC. P/N: 715596
P.O. Box 247, 4320 Aerotech Center Way New Item: (11/10)
Paso Robles, CA 93447 PAGE 5 of 7
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 10-11-10
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your
conversion, we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of
Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other
related equipment. These manuals are normally available at automotive dealerships and parts stores.
JKCABLE SHIFT LINKAGE UPGRADE KIT
Shifter Modifications: The shifter assembly needs to be disassembled to install the new stronger shifter com-
ponents. The plastic shifter cover is removed by slipping a straight screw driver under its edge and lifting gently.
The shift handle pivot pin can be removed by tapping the pin several times with a small hammer or mallet.
After the pivot pin is removed, you should be able to
remove the handle assembly. The handle has a pivot
pin that also must be pressed out. Be careful not to
loose the spring and bushing when pulling the plastic
assembly from the handle. We found that a 7/16"
-1/4" drive socket works great to press the handle pin
from the handle.