Advance Adapters 715596 - Manual (Page 6)

ADVANCE ADAPTERS INC. P/N: 715596
P.O. Box 247, 4320 Aerotech Center Way New Item: (11/10)
Paso Robles, CA 93447 PAGE 6 of 7
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 10-11-10
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your
conversion, we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of
Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other
related equipment. These manuals are normally available at automotive dealerships and parts stores.
JKCABLE SHIFT LINKAGE UPGRADE KIT
Slip the aluminum housing on to the JK handle and reinstall the pin that was just removed. Be sure that the upper
handle leans back towards the 1/2" hole in the aluminum housing.
Install the stock spring and spring bushing from the old assembly into the new (gold bracket) and mount to the
aluminum housing using the supplied 1/4"-20 x 5/8" button head bolts.
Reinstall the handle assembly back into the shifter housing and reinstall the stock pivot pin and clip. Loosely bolt
the new cable mounting bracket to the stock shifter housing using the 1/4"-20 x 3/4" S.H.S.C. Align the back edge
of the bracket with the shifter housing so they are parallel. Tighten the bracket to the housing. Drill two 1/4" holes
using the bracket as a template. Secure the bracket with the other two bolts.