Belkin PM01110 User Manual

Page 65

G Wireless Router

sections

table of contents

UsInG THe Web-based adVanCed UseR InTeRfaCe

3�

Place your secondary Access Point within range of your Router

and near the area where you want to extend the range or add the

network segment� Typically, indoor range should be between 100

and 200 feet�

4�

Connect power to your Access Point� Make sure the Access Point

is on and proceed to the next step�

5�

From a computer already connected to your Router, access the

Advanced Setup Utility by opening your browser� In the address

bar, type in “192�168�2�1”� Do not type in “www” or “http://” before

the number� Note: If you have changed your Router’s IP address,

use that IP address�

6�

You will see the Router’s user interface in the browser window�

Click “Wireless Bridge” on the left-hand side of the screen� You will

see the following screen�