Belkin PM01110 User Manual

Page 59

G Wireless Router

sections

table of contents

UsInG THe Web-based adVanCed UseR InTeRfaCe

setting WPa/WPa2

4� Click “Apply Changes” to finish� You must now set all clients to

match these settings depending on the type of access you want

them to have�

Guest access
The guest pre-shared key allows guest users an Internet-only access to

restrict them from entering your network and having access to files on

your PCs� Enter your pre-shared key for guest access� This can be from

eight to 63 characters and can be letters, numbers, or symbols� Click

“Apply Changes” to finish�

1�

Select “WPA/WPA2-Personal (PSK)” from the “Security Mode”

drop-down box�

2�

Select “WPA-PSK” for just WPA authentication, or “WPA2-PSK” for

just WPA2 authentication, or you may select “WPA-PSK + WPA2-

PSK” for WPA and WPA2 as the authentication type�

3�

Enter your pre-shared key� This can be from eight to 63 characters

and can be letters, numbers, or symbols� This same key must

be used on all of the clients that you set up� This pre-shared key

will allow users full access to your network including shared files

and printers�