Belkin PM01110 - Manual (Page 42)

40
G Wireless Router
sections
table of contents 1 2 3 4 6 7 8 9 10 5
alTeRnaTe seTUP MeTHod
setting your Internet service Provider (IsP) Connection Type to layer 2 Tunneling Protocol (l2TP)
[Israel Only]� Some ISPs require a connection using L2TP protocol, a type of connection most common in Israel� This sets up a direct connection to
the ISP’s system� Type in the information provided by your ISP in the space provided� When you have finished, click “Apply Changes”� After you apply
the changes, the “Internet Status” indicator will read “Connected” if your Router is set up properly�
1� l2TP account
Provided by your ISP� Enter your L2TP User ID here�
2� l2TP Password
Type in your password and retype it into the “Retype Password” box to
confirm it�
3� Host name
Provided by your ISP� Enter your host name here�
4� service IP address
Provided by your ISP� Enter your L2TP gateway/service IP address here�
5� My Internet IP
1) Get Dynamically From ISP: Gets WAN IP address from
ISP automatically�
2) Use Static IP address: Need to enter ISP information below fields
(My IP Address)�