Snorkel AB60J CE User Manual

Page 20

Chapter 5 – Gauges and Displays

AB60J – 0182099EE

Fluid Level and Temperature Gauge

A gauge on the end of the reservoir displays the level

and temperature of the hydraulic fluid (refer to Figure

5.5). The reservoir is behind the door on the right side of

the turntable.

Figure 5.5 – Hydraulic Fluid Gauge

If the temperature rises above 93°C (200°F) stop ma-

chine operation and let the fluid cool before resuming

operation.

Engine Oil

The engine oil level is measured with a dipstick. The

dipstick is the only way to accurately determine the en-

gine oil level. The engine oil level should always be be-

tween the add and full marks on the dipstick.

Hydraulic Fluid Filter Gauge

The fluid filter gauge (refer to Figure 5.4) is located on

the return line filter on the left side of the reservoir. The

reservoir is behind the door on the right side of the turn-

table. During high pump flow situations, the gauge indi-

cates the condition of the filter. When the needle on the

gauge is in the red zone, it is time to change the filter.

Figure 5.4 – Hydraulic Fluid Filter Gauge

Filter Gauge

Fluid Level and

Temperature Gauge