Snorkel TL49K-sn8500+ - Manual (Page 36)

32 508159-000 TL49K
This machine variant is fitted with a 2.2 kva generator, with remote start and
stop.
This manual does not cover the maintenance of the generator.
For maintenance details refer to the manufacturers handbook.
Prior to operating the generator, follow these simple guidelines;
a)
ensure there is adequate fuel for the task in hand
b) warm the engine prior to switching off at the platform.
c) check the oil level prior to starting the generator
1. To use the generator, simply switch the fuel on, with the lever.
2. With the key, turn the ignition to start, motor on, releasing the starter
when the engine fires.
3. Ensure the voltage output matches the appliance intended for use.
4.
Connect the flying plug.
5. With the engine running, power will automatically be supplied to the
battery charger, and the platform socket. It is possible to operate the
machine lift controls with the battery charger switched on.
Generator option APPENDIX