Snorkel TL49J-01-sn008562+ - Manual (Page 8)

4 TL49J 513868-000
The SNORKEL TL49J is of the parallel linkage vertical boom design, mounted on a road
towable trailer. The unique, yet very simple boom configuration gives the maximum safety and
control ability combined with a robust construction to withstand a heavy working environment
The TL49J machine is designed for two man capacity (200 kg S.W.L.).
The machine incorporates a bottom boom with tie-rod, a short vertical boom and a top boom
with a telescope section. The TL49J also has an independent hydraulically operated flick-out
boom and rotating cage for extra manoeuvrability.
The hydraulic system is of a failsafe design throughout, with built in hydraulic lock valves on
all of the rams as a precaution against hose failure. The machine is controlled by means of
proportional manual controls of the ‘direct hand’ lever operating type. These valves are located
at both the base and in the cage, as standard.
Electrically operated emergency lowering valves are fitted as standard to allow the machine to
be lowered from the base and basket.
The hydraulically operated outriggers are fitted with load sensing interlocks, to prevent the booms
from being raised without the outriggers being extended and under load. An interlock prevents
the hydraulic outriggers being accidentally retracted while the booms are raised. A simple
system of warning lights show the power supply is on and each of the outriggers is under load.
Performance.
Maximum Working Height 17.00 m
Maximum Working Outreach: 9.10 m
Capacity (2 man working): 200 kg
Slewing Arc: 680°
Airborne Noise Emissions (Battery): 70 dB(A)
Construction Standards.
The machine complies fully with the requirements of the following EEC Directives:
Directive 98/37/EC – the ‘Machinery Directive’.
Directive 89/336/EEC – the ‘Electromagnetic Compatibility Directive’.
Directive 73/23/EEC – the ‘Low Voltage Directive’.
EN 6020-1/1993 ‘Safety of Machinery.’
The machine is designed and tested in accordance with all relevant B.S.I and European
Standards including EN280.
DESCRIPTION OF EQUIPMENT