Snorkel MB26-sn435-999 - Manual (Page 26)

2. Operation & Specifications
2-17
DAILY PREVENTATIVE MAINTENANCE CHECKLIST
Daily daily preventative maintenance will prevent abnormal wear and prolong the life of all
systems. The inspection & maintenance schedule should be performed at the specified
intervals.
Inspection and maintenance shall be performed by personnel who are trained and familiar
with mechanical and electrical procedures.
W A R N I N G
Before performing preventative maintenance, familiarize yourself with the
operation of the machine.
Always block the elevating assembly whenever it is necessary to perform
maintenance while the platform is elevated.
This Daily checklist has been designed for machine service and maintenance.
Please photocopy this page and use the checklist when inspecting the machine.
MAINTENANCE TABLE KEY PREVENTATIVE MAINTENANCE REPORT
Y = Yes/Acceptable Date: _______________________________________
N = No/Not Acceptable Owner: _____________________________________
R = Repaired/Acceptabl e Model No: ___________________________________
Serial No: ___________________________________
Serviced By: _________________________________
COMPONENT INSPECTION OR SERVICE Y N R
BATTERY
Check electrolyte level.
Check battery cable condition.
CHASSIS
Check hoses for pinch or rubbing points.
Check welds for cracks.
CONTROL CABLE Check the exterior of the cable for pinching, binding or wear.
CONTROLLER Check switch operation.
DRIVE MOTORS Check for operation and leaks.
ELEVATING ASSEMBLY Inspect for structural cracks.
EMERGENCY LOWERING
SYSTEM
Operate the emergency lowering valve & check for serviceability.
ENTIRE UNIT Check for and repair collision damage.
HYDRAULIC FLUID Check fluid level.
HYDRAULIC PUMP Check for hose fitting leaks.
HYDRAULIC SYSTEM Check for leaks.
LABELS Check for peeling, missing, or unreadable labels & replace.
PLATFORM DECK AND
RAILS
Check welds for cracks.
TYRES AND WHEELS Check for damage.
COMPONENT INSPECTION OR SERVICE Y N R
Table 1: Daily Maintenance Checklist