Snorkel MB26-sn435-999 - Manual (Page 11)

2. Operation & Specifications
2-2
2.2 GENERAL DESCRIPTION
The MB20N/26 are self propelled, fast acting aerial work platforms, designed to raise two
operators with hand tools to a platform floor height of 6.00m and 7.76m respectively. The
accessible height is approximately 2.00m above these figures.
The unit offers the ability to reach over obstacles but must be used on firm and level ground
at all times.
D A N G E R
DO NOT use the lifting mechanism to raise or lower goods or persons
except within the cage and subject to the specified weight limitations.
D A N G E R
DO NOT enter the platform from any structure, rack or other platform.
Figure 2: Work Platform
W A R N I N G
DO NOT use the work platform without safety drop-bar in place
and with the safety harness fitted.
Elevating Assembly
Platform Controller
Safety Drop-bar
Platform
Chassis Controls
Chassis