Synergy 8023-X - Jeep JK Synergy Stage 3 Suspension System - Manual (Page 14)

• Attach the new track bar relocation bracket to the factory bracket as shown with
the new 9/16” bolt and lock nut; use a flat washer under the bolt head and lock
nut.
• Install the u-bolts over the axle tube and through the track bar relocation bracket,
use a flat washer and nylock nut to secure the u-bolt.
• Torque the 9/16 bolt to 150 ft-lbs, and the 3/8” u-bolts to 40 ft-lbs
• Wait until the vehicle is sitting at ride height to attach the track bar.
20. INSTALL LOWER SHOCK RELOCATION BRACKETS AND SWAY BAR
LINKS
• Cut off the factory lower shock brackets using a grinder with a cut off wheel or a
sawzall. Grind the weld smooth.
Figure 20-1 Figure 20-2