Lukas Compact Units - Manual (Page 8)

8
The generally applicable, legal and other binding national and international regulations
pertaining to the prevention of accidents and protection of the environment apply and are to
be implemented in addition to the operating instructions.
WARNING / DANGER / CAUTION!
The equipment is to be used exclusively for the purpose stated in the operating
instructions (see chapter "Proper use"). Any form of use beyond this is not considered
proper use. The manufacturer / supplier is not liable for any damages resulting from improper
use. The user bears sole responsibility for such use.
Observance of the operating instructions and compliance with the inspection and maintenance
conditions are covered by the definition of proper use.
Never work when you are overtired or intoxicated.
Proper use 3.
Accessories and spare parts for the rerailing equipment are available from your authorised
LUKAS dealer.
WARNING / DANGER / CAUTION!
Always observe the safety notes of these operating instructions with regard to
place of installation and type of installation. The units must not be used in all
atmospheres, since there could be a danger of explosion.
LUKAS hydraulic units are designed specifically for supplying hydraulic fluid to rerailing
equipment manufactured by LUKAS in order that this equipment can be used to upright and
rerail railway vehicles.
While it is possible for the units to supply pressure/fluid to other makes of rerailing equipment,
this shall require the technical inspection and approval of LUKAS.
Labelling of the units 4.
Motor variants:
PC = Electric motor
GC = Petrol engine
DC = Diesel engine
PC
Motor variants
6
Type group
-