Lukas Compact Units User Manual

Page 19

Visual inspection

Hydraulic units

• Check that all hydraulic connections are tightened

• General tightness, no leakage (the hot oils do not have any influence on the function)

• Is there damage to the motor, connecting block or housing?

• Frame present, undamaged and securely assembled?

• Are type plate, all activation plates, signs, identification marks and warning labels are

present and legible?

• Are all covers (e.g. protective roof, exhaust cover) present and undamaged?

• Are all liquid levels within the specified tolerances?

• Are the starters in proper working order and undamaged?

• Couplings must be easy to couple (where present)

• Dust protection caps must be available

• All necessary accessories (such as spark plugs, plug socket and fuel canister must be

present.

Connected hoses

(also observe the separate operating instructions for the hydraulic hoses)

• Visual check for visible damage

• Check for leaks.

Function test

• No suspicious noises

• Checks at nominal pressure (75% of maximum pressure).

(Recommendation: Carry out the load test with a fully assembled rerailing system. LUKAS

also offers a range of appropriate test equipment.)

10.2 Hydraulic units with combustion engine

10.3 Hydraulic units with electric motor