Lukas Compact Units - Manual (Page 27)

27
2. Pull the engine / motor off. Please ensure that you do not damage the engine / motor shaft
mount.
3. Equip the shaft of the new engine / motor with an appropriate adjusting key (provided it is
not already in place).
4. Grease the shaft of the new engine / motor and push the shaft of the new engine / motor
into the engine / motor shaft mount.
Ensure that the adjusting key of the engine / motor shaft is inserted into the correct guide
of the engine / motor shaft mount.
5. Refit the engine / motor in reverse order and fasten the securing bolts and nuts.
Please consult the spare parts list for the necessary torques.
6. For combustion engine pumps, top up the necessary liquid levels (e.g. engine oil, fuel).
For electric motor pumps, connect the necessary electrical cables.
7. Perform a function test with the hydraulic unit (as described in the chapter entitled
"Maintenance and service").
11.3.6 Labels
All damaged and/or illegible labels (safety notices, type plate, etc.) must be renewed.
Procedure:
1. Remove damaged and/or illegible labels.
2. Clean the surfaces using industrial alcohol.
3. Attach new labels.
Make sure that the labels are attached in the right position. If you are no longer sure about
this, contact your authorised LUKAS dealer or LUKAS directly.