Apple Mac Pro Server (Mid 2010) - Manual (Page 78)

78 Chapter 4 Problem, Meet Solution
 Restart your computer while holding down the Command key (x) and R key, until
the computer restarts. When the Mac OS X Utilities application appears, select an
option to repair your disk, restore your software, or reinstall Mac OS X and Apple
applications from the Mac OS X Utilities pane. For more information, see “Repairing,
Restoring, or Reinstalling Mac OS X Software” on page 80.
 If your computer still does not start up, try resetting the parameter random access
memory (PRAM). Turn on the computer and immediately hold down the Command (x),
Option, P, and R keys until you hear the startup sound a second time. Release the keys.
The PRAM is reset to the default values and your clock settings may need to be reset.
• If your computer does not start up after resetting the PRAM, restart your computer
while holding down the Option key to select your startup disk.
• If this doesn’t work, restart your computer while holding down the Shift key.
If you’re unable to eject a disc
A file on the disc may be in use. Quit applications that are open, and then try again.
If that doesn’t work, choose Apple () > Restart and hold down either the mouse
button or the Media Eject key (C) on an Apple Keyboard.
If that doesn’t work:
1 Shut down the computer and remove the side panel (see the instructions on page 33).
2 Pull the optical drive carrier out of the optical drive bay (see “Replacing an Optical
Drive” on page 62).
3 Carefully insert the end of a straightened paper clip into the small hole on the front of
the optical drive.