Apple Mac Pro Server (Mid 2010) - Manual (Page 59)

59 Chapter 3 Making a Good Thing Better
Installing a Solid State Drive
Your Mac Pro can accommodate up to four internal 2.5-inch solid state drives in the
drive bays. If your Mac Pro comes with a single drive installed, it’s in the first bay. You
can install drives in the second, third, and fourth drive bays.
To install a solid state drive:
1 Open your Mac Pro and remove the side panel, following the instructions in “Opening
Your Mac Pro” on page 33.
2 Lift the latch to unlock the drive carriers.
Note: When the latch is down, the carriers are locked in the drive bays and can’t
be removed.
3 Pull the carrier out of the drive bay.
Drive carrier