Apple Macintosh Performa 600 Series - Manual (Page 93)

2 Turn the mouse upside-down and turn the plastic ring on the bottom counterclockwise
to disengage it.
On some mouse devices, you may need to press the plastic ring (rather than
turn it) to disengage it. If you cannot disengage the ring, your mouse may be
locked. See “Locking and Unlocking the Mouse,” next in the appendix.
3 Turn the mouse right-side up with one hand and catch the ring and the ball with your
other hand.
4 Clean the three small rollers inside the mouse with a cotton swab moistened with water.
Rotate the rollers to clean all around them.
5 Wipe the mouse ball with a clean, soft, dry, and lint-free cloth.
6 If necessary, wash the mouse ball with warm soapy water (use a mild soap such as a
dishwashing liquid) and then dry the mouse ball thoroughly.
7 Gently blow into the mouse case to remove any dust that has collected there.
8 Put the ball and the ring back in place.
Your mouse should roll smoothly across your mouse pad or desk. If it doesn’t,
repeat these instructions carefully.
86 Appendix A