Apple Macintosh Performa 600 Series - Manual (Page 104)

Closing the computer
1 Slip the base of the logic board into the guide rails inside the computer case and swing
the handle back into its storage position.
2 Press the reset button on the logic board, and then slide the board back into
the computer.
When you press the reset button, some of your computer’s software settings
will change. You may want to open the control panels for the date and time,
keyboard, and mouse to make sure that they are set the way you want them.
For more information about working with control panels, see the “Setting
Options” topic of Macintosh Guide, available in the Guide (h) menu.
1 Press the reset button.
2 Gently but firmly
push on the vertical
plate until the logic board
is solidly back in place.
Make sure the logic board slides
into the guides that are on both
sides of the computer’s interior.
Swing the handle up,
into its storage position.
97 Installing an Expansion Card