Apple Macintosh Performa 6100 Series - Manual (Page 81)

Initializing a hard disk
You initialize an Apple SCSI hard disk by using a program called Apple HD
SC Setup, which is on the Utilities floppy disk that came with your computer.
If your computer came with a CD-ROM drive and you didn’t receive floppy
disks, you can find Apple HD SC Setup on the Macintosh Performa CD.
1 Start up your computer from the Utilities disk or the Macintosh Performa CD.
See “Starting Up From a CD-ROM Disc” or “Starting Up From a Floppy
Disk” in the section “Repairing a Damaged Disk,” earlier in this chapter.
2 Open the Apple HD SC Setup icon.
3 Click Drive until the disk you want to initialize appears.
You cannot initialize the disk that you used to start up your computer or the
disk that contains the Apple HD SC Setup program.
4 Click Initialize.
71 Troubleshooting
SCSI ID number of the currently selected hard disk
(The number of the internal hard disk is 0.)
Name of the currently selected hard disk