Apple Macintosh Performa 6100 Series - Manual (Page 16)

Connecting the mouse and keyboard
1 Plug the mouse cable into the recessed port on the back of the keyboard.
The plug and the port are marked with the ◊ icon (symbol). The positions of
the port and icon on your keyboard may be different from those pictured.
By the way: A port marked with the ◊ icon is called an Apple Desktop Bus
(ADB) port.
2 Plug the keyboard cable into the port marked with the ◊ icon on the back of the
computer.
Some monitors have a port to which you can connect the keyboard or mouse.
See the information that came with your monitor.
Connecting other equipment
If you are new to the Macintosh, it’s a good idea to get some experience using
your computer before you connect other equipment, such as a printer or
scanner. To learn basic Macintosh skills, continue with the instructions in this
chapter.
When you’re ready to connect other equipment to your Macintosh, see the
instructions in Chapter 3.
This cable plugs into the Apple Desktop Bus (ADB) port,
marked with the
◊ icon, on the back of the computer.
Plug the mouse into the recessed port on
the keyboard. The flat part of the plug should
be pointing down, as shown here.
6 Chapter 1