Apple PowerBook Duo Dock (including Duo Dock II) - Manual (Page 34)

17.
Tu
rn
over the subassembly and car
efully put it back
into the base of the dock. Be careful not to bend the small metal fingers around the port openings.
18.
Push the subassembly towar
d the back of the dock to
close the gap (the r
everse of step 6).
19.
Tighten the scr
ews you loosened in step 5.
The screws are spring-loaded. Y
ou’ll need to exert strong
downward pressure while you tur
n them clockwise.
20.
R
econnect the power supply cable you disconnected in
step 4.
Gap
Metal fingers
30