Apple IIe Card - Manual (Page 54)

Displaying a picture of an Apple IIe screen
To see your Apple IIe screen without leaving the Option Panel, follow these
steps:
Before you begin: Make sure the Option Panel is open.
1. Choose the Show IIe Screen command from the File menu.
A miniature version of the Apple IIe screen is displayed in a small window.
2. When you're finished viewing the picture, click the close box.
The window closes.
Formatting ProDos Floppy Disks
Apple IIe programs can read files from 3.5-inch floppy disks only if the
disks are formatted as ProDOS disks. You can format ProDOS floppy disks by
using the Apple IIe programs on the System Utilities disk. See the
instructions that came with the System Utilities disk for details.
Formatting ProDos floppy disks in the Macintosh environment
If you have version 7 of system software, you can also format ProDOS floppy
disks in the Macintosh environment. Follow these steps:
1. Insert the disk you want to format.
If you see a message asking if you want to initialize the disk, skip to step
4.
2. Click the disk's icon once to select it.
The disk's icon is highlighted.
3. Choose the Erase Disk command from the Special menu.
4. Type a name for the disk.
5. Select ProDOS from the Format pop-up menu.
6. Click the Erase button.
APPENDIX A-TROUBLESHOOTING
If you have problems running Apple IIe programs on your Macintosh LC, look in
this appendix for a description of your problem. You will find more than one
suggested solution for the problems outlined in this appendix. Try each
solution one at a time until the problem is solved.
!! WARNING: If you have a problem with your Apple IIe Card and nothing
presented in this chapter solves it, take the Apple IIe Card to your
authorized Apple dealer or service provider. Attempting to repair the Apple
IIe Card yourself may void the limited warranty. Contact your authorized
Apple dealer or service provider for additional information about this or any
other warranty question. !!