Apple IIe Card - Manual (Page 53)

return to the Macintosh environment.
Printing a picture of an Apple IIe screen
To print a snapshot of what's currently on your Apple IIe screen, follow the
steps in this section.
Before you begin: If necessary, adjust the page settings as described in the
next section, "Adjusting Page Setup for Printing Apple IIe Screens."
1. Open the Option Panel by pressing Control-Command-Esc.
2. Choose the Print IIe Screen command from the File menu.
The print dialog box for your printer is displayed. Make any adjustments you
like.
3. Click OK.
4. Click Continue to return to your Apple IIe work, or click Quit IIe to
return to the Macintosh environment.
Adjusting Page Setup for printing Apple IIe screens. The Apple IIe screen is
too wide to print the usual way on most printers. However, if your printer
can print sideways (all Apple printers can), you won't have any problem.
Follow these steps:
1. Choose the Page Setup command from the File menu.
The Page Setup dialog box opens, as shown in the next step.
2. Click the sideways orientation icon.
3. Click OK.
Your screen snapshots should now fit on a page.
Have a LaserWriter? If you have an Apple LaserWriter, you can fit the image
on a single sheet without printing sideways. Choose Page Setup from the File
menu and click the Options button to display more printing options. Then
click the Larger Print Area checkbox until an X appears and click the OK
button in each of the two dialog boxes.
Copying a picture of an Apple IIe screen
To copy a snapshot of what's currently on your Apple IIe screen to the
Clipboard, follow these steps:
1. Open the Option Panel by pressing Control-Command-Esc.
2. Choose the Copy IIe Screen command from the Edit menu.
The snapshot is placed on your Clipboard. You can now paste the picture into
any Macintosh program that understands PICT files.
3. Click Continue to return to your Apple IIe work, or click Quit IIe to
return to the Macintosh environment.