Apple IIe Card - Manual (Page 36)

Copying Apple IIe pictures
If you want to transfer an Apple IIe picture to a Macintosh program, you can
copy and paste the picture as described in these steps:
1. Use your Apple IIe program to display the picture on your screen.
2. Save your work, if necessary.
3. Press Control-Command-Esc to open the Option Panel.
The Option Panel opens.
4. Choose the Copy IIe Screen command from the Edit menu.
5. Click the Quit IIe button.
When asked if you really want to quit, click Quit IIe again.
6. Open the Macintosh file in which you want to place the picture.
7. Choose the Paste command from the Edit menu.
The picture is pasted in.
If you have more than one Apple IIe picture to transfer at the same time, you
may wish to use the Macintosh desk accessory called the Scrapbook. For more
information, see the reference book that came with your Macintosh.
Using Network File Servers
If your Macintosh LC is connected to a file server over a network, you can
use it just as you did with your original Apple IIe: you can start up from
the file server and access files on it, as the next two sections explain.
Note, however, that you cannot start up from a private Macintosh computer,
even if it is sharing its files. (File sharing is a new feature in version 7
of Macintosh system software.)
Starting up from the file server
With your Apple IIe computer, you could start up from a file server. When
you're in the Apple IIe environment, you can do the same with your Macintosh
LC and your Apple IIe Card. In fact, the method is the same as before.
Before you begin, make sure the following preparations have been made:
- Your network administrator, the person who installs and maintains your
network and your file server, has connected everyone to the network and
prepared the file server as described in the instructions that come with the
AppleShare Workstation Card and the AppleShare File Server server software.
- You have used the Option Panel to install the AppleShare card into one of
the slots, as explained in Chapter 4, "Setting Up Cards and Slots."
- You have set the startup device either to Scan or to the slot in which the
AppleShare card is installed. The AppleShare card is usually installed in
slot 7.