Apple IIe Card - Manual (Page 50)

System Folder on the IIe Startup Disk; if you're a hard disk startup person,
drag the file into the System Folder on your hard disk.
Returning to your work
After you're finished with the Apple IIe Option Panel, you can return to what
you were doing before you opened the Option Panel -- running a program or
utility, writing a program, and so on -- by clicking the Continue button.
Some Option Panel settings take effect only after you restart the Apple IIe
Card. If you changed any such settings, you see a message after clicking
Continue. The message reminds you to restart the Apple IIe Card if you want
the new settings to take effect.
To return to your work, follow these steps:
1. From the Option Panel, click the Continue button.
You return to where you were before opening the Apple IIe Option Panel.
You see a message indicating that the Option Panel settings you made will not
take effect until you restart the Apple IIe Card.
2. If you see a message, click the button for the action you want to take.
Clicking the Restart IIe button restarts the Apple IIe Card.
Clicking the Continue button returns you to what you were doing before
opening the Option Panel; the new settings will not take effect until you
restart at a later time.
Clicking the Cancel button returns you to the Apple IIe Option Panel; the new
settings will not take effect until you restart at a later time.
Restarting the Apple IIe Card
Clicking the Restart IIe button performs a "cold" reset of the Apple IIe
Card. Clicking the Restart IIe button has the same effect as pressing (Open
apple)-Control-Reset on the original Apple IIe keyboard, except that clicking
the Restart IIe button also causes any changes you made in the Option Panel
to take effect.
Clicking the Restart IIe button is only one way to restart the Apple IIe
Card. Whenever the Macintosh LC is in the Apple IIe environment, pressing
Command-Control-Reset immediately resets the Apple IIe Card.
The Reset key on a typical Macintosh LC keyboard has a triangle on it and is
placed above the top row of keys:
!! WARNING: Use Command-Control-Reset with caution. When you press Command-
Control-Reset, the Apple IIe Card resets immediately, without warning you to
save your work on a floppy disk. Pressing Command-Control-Reset from the
Apple IIe Option Panel, or in the Macintosh environment, immediately restarts
your Macintosh LC -- with no warning to save your work. !!
To restart the Apple IIe Card, follow these steps:
1. Press Control-Command-Esc.