Apple PC Serial and Parallel Card - Manual (Page 66)

Updating the Windows/DOS PC Compatibility software
IMPORTANT If you have not previously installed the PC Compatibility Card
software and created a drive container, see your PC Compatibility Card user’s
manual and create a drive container before you proceed.
1 If necessary, switch to the PC environment.
To switch to the PC environment from the Mac OS, open the PC Setup
control panel and click “Switch to PC.”
2 Insert the PC Software–PC Compatibility Card floppy disk.
3 In Windows, choose Run from the File menu. In Windows 95, click the Start button; then
choose Run from the menu that appears.
4 In the dialog box that appears, type the following:
A:\SETUP
5 Follow the instructions that appear on the screen.
The recommended directory to install files in is C:\APPLE.
6 When updating is complete, press
x
-E to eject the floppy disk.
7 Restart the PC.
If you have Windows 95, click the Start button; then select Shutdown. A
dialog box appears. Select Restart and then click OK.
If you have Windows 3.1, first exit Windows. Then press Control-Alt-… at
the DOS prompt. If you do not have a … key, then press Control-Alt-. at the
DOS prompt.
To restart DOS, quit any open applications. Then press Control-Alt-… or
Control-Alt-. at the DOS prompt.
Next you must update the Mac OS PC Compatibility software. Follow the
steps in the next section.
66 Chapter 6