Apple PC Serial and Parallel Card - Manual (Page 36)

Attaching the peripheral flex cable to the PC Serial and Parallel Card
12 Bend the peripheral flex cable and attach the cable to the connector as shown.
Support the corner of the PC Serial and Parallel Card while you attach the
peripheral flex cable.
13 If you removed a card from the third PCI expansion slot, reinsert it now.
See the user’s manual that came with your card for instructions on how to
install it.
14 If you removed your 7-inch PC Compatibility Card, see the user’s manual that came with
your card for instructions on how to route the cables inside your computer.
Plug the peripheral flex cable
into this connector if you have a
12" PC Compatibility Card.
Plug the peripheral flex cable
into this connector if you have a
7" PC Compatibility Card.
36 Chapter 3