Apple PC Serial and Parallel Card - Manual (Page 25)

18 Press the reset button on the logic board and slide the logic board back into
the computer.
Note: When you press the reset button, some of your computer’s software
settings will change. You may want to open the control panels for the date and
time, keyboard, and mouse to make sure that they are set the way you want.
19 Reinsert screws to secure the logic board.
20 Reconnect the power cord.
You are now finished installing the card.
What’s next?
Next, go to Chapter 6, “Updating Your PC Compatibility Card Software.”
Then go to Chapter 7 for instructions on connecting equipment to your
PC Serial and Parallel Card.
1 Press the reset button.
2 Gently but firmly push
on the vertical plate until
the logic board is solidly
back in place.
25 Installing the Card in a Power Macintosh 6400 or 6500