Apple PC Serial and Parallel Card User Manual

Page 62

Text mode
Original mode

Attaching the peripheral flex cable to the PC Serial and Parallel Card

Carefully bend the peripheral flex cable and attach it to the connector located on the PC
Serial and Parallel Card as shown.

Reinsert any cards you removed.

If you are installing the PC Compatibility Card for the first time, return to the
PC Compatibility Card user’s manual now to finish the card’s installation.

Plug the peripheral flex cable
into this connector if you have a
12" PC Compatibility Card.

Plug the peripheral flex cable
into this connector if you have a
7" PC Compatibility Card.

Chapter 5