Apple PC Serial and Parallel Card - Manual (Page 48)

Attaching the peripheral flex cable to the PC Compatibility Card
9 Attach the peripheral flex cable as shown.
If you have trouble attaching the peripheral flex cable, remove the
PC Compatibility Card (but do not remove the audio cables). If you have a
Power Macintosh 9500, you can remove additional cards to make more room
to maneuver.
10 If you removed the PC Compatibility Card to attach the peripheral flex cable, then
reinsert it now.
Tuck the audio cables on top of the card.
Plug the peripheral flex cable
into this connector on a
7" PC Compatibility Card.
Plug the peripheral flex cable
into this connector on a
12" PC Compatibility Card.
48 Chapter 4