Apple PC Serial and Parallel Card - Manual (Page 60)

Attaching the peripheral flex cable to the PC Compatibility Card
10 Attach the peripheral flex cable as shown.
Use the connector shown in the illustration.
Inserting the PC Serial and Parallel Card
11 Align the PC Serial and Parallel Card with the second expansion slot.
IMPORTANT Always hold the card by its edges. Don’t touch any of the
components on the card.
Align the card’s connector end (gold in color) with the second PCI expansion
slot. The ports on the card should face the port access opening on the
computer’s back panel.
Plug the peripheral flex cable
into this connector on a
7" PC Compatibility Card.
Plug the peripheral flex cable
into this connector on a
12" PC Compatibility Card.
60 Chapter 5