Apple PC Serial and Parallel Card - Manual (Page 35)

Inserting the PC Serial and Parallel Card
10 Align the card with the second expansion slot.
IMPORTANT Always hold the card by its edges. Don’t touch any of the
components on the card.
Align the card’s connector end (gold in color) with the second PCI
expansion slot.
11 Insert the card.
Press down on the card. When the card is fully inserted, you won’t be able to
see the gold-colored connector any more.
m Don’t rock the card from side to side; press it straight into the slot. Rocking
the card can damage the PCI slot.
m Don’t force the card. If you meet a lot of resistance, pull the card out and
try again.
m To see if the card is connected, pull it gently. If it resists, it is connected.
PC Serial and Parallel Card
35 Installing the Card in a Power Macintosh 7200, 7300, 7500, or 7600