Apple PC Serial and Parallel Card - Manual (Page 27)

27
Except where noted, the illustrations in this chapter show the 7200 model.
If you have a 7300, 7500, or 7600 model, some of the illustrations may look
slightly different from your computer, but the procedure is the same.
After you install the PC Serial and Parallel Card hardware, go to Chapter 6,
“Updating Your PC Compatibility Card Software.” Then turn to Chapter 7 to
learn more about connecting PC-compatible equipment to your PC Serial and
Parallel Card.
WARNING Shipping your computer with a PC Compatibility Card
installed may cause damage to the card or to your computer. Your
PC Compatibility Card should be shipped separately. (See your
PC Compatibility Card user’s manual for instructions on how to remove
the card.)
3 Installing the Card
in a Power Macintosh 7200, 7300, 7500, or 7600