Apple PC Serial and Parallel Card - Manual (Page 6)

Attaching the peripheral flex cable to the PC Compatibility Card
8 With the PC Compatibility Card turned face up as shown, attach the peripheral flex cable
to the connector.
IMPORTANT Always hold the card by its edges. Don’t touch any of the
components on the card.
9 Insert the PC Compatibility Card into the second slot.
Follow the installation instructions in your PC Compatibility Card user’s
manual or PC Compatibility Card Update to install the bracket that holds the
PC Compatibility Card in place. Then continue with the next step.
Plug the peripheral flex cable
into this connector on a
7" PC Compatibility Card.
Plug the peripheral flex cable
into this connector on a
12" PC Compatibility Card.
6 Chapter 1