Overview, Models, Downloadable files – AEM Infinity Supported Applications - Honda H-Series Engine User Manual
Page 2: Files, Adapter harness options
2
© 2014 AEM Performance Electronics
OVERVIEW
The AEM Infinity EMS can be adapted to most fuel injected engines.The base configuration files available
for the Infinity ECU are starting points only and will need to be modified for your specific application. This
manual lists the files available and suggested changes for your engine. It also includes a pinout with
suggestions for adapting the Infinity ECU to your engine harness. It is the responsibility of the installer to
verify this information before starting the engine.
MODELS
Honda
1992–2000 B/D/H Series Engines
DOWNLOADABLE FILES
Files can be downloaded from
. An experienced tuner must be available to configure
and manipulate the data before driving can commence. The Quick Start Guide and Full Manual describe
the steps for logging in and registering at
These documents are available for
download in the Support section of the AEM Electronics website:
FILES
Downloadable files for Honda B/D/H Series
7100-XXXX-62 Infinity-10 (XXXX = serial number)
7101-XXXX-63 Infinity-8 (XXXX = serial number)
In order to properly control a 1992–2000 Honda B/D/H engine, the
this document MUST be changed to the given settings. Failure to do so may result in improper function
and possible ECU damage.
ADAPTER HARNESS OPTIONS
30-3702 Harness, Mini Lead
This harness includes a fused power distribution center with main relay. Pre-terminated connectors are
available for the internal UEGO sensors and AEMNet. A bag of multi-color flying leads is included to
simplify custom harness builds.
30-3701 Connector Kit
This kit includes mating connectors and terminals for the Infinity. It also includes a main relay kit which
is necessary for proper power distribution. This kit is best suited for experienced installers who want to
build their own harness.
30-3600 O2 Sensor Extension Harness
30-3601 IP67 Comms Cable
30-3602 IP67 Logging Cable