SkyTrak 6042 Operation Manual - Manual (Page 45)

Operation
43 Model 6042 Origin 2/04
Auxiliary Attachment Control Lever
The auxiliary attachment control lever (5) controls the functions of an
optional attachment that is mounted to the vehicle and requires a hydraulic
supply for operation. Some of the optional attachments that require auxiliary
hydraulics are: Side Tilt Carriage, Auger,Swing Carriage, and 3 Foot Truss
Boom w/Winch.
When the control lever is moved to the right it will provide
hydraulic system pressure through the female disconnect
coupling for the auxiliary attachment. Hydraulic fluid will return
to the tank through the male disconnect coupling.
When the control lever is moved to the left it will provide
hydraulic system pressure to the male disconnect coupling for
the auxiliary attachment. Hydraulic fluid will return to the tank
through the female disconnect coupling.
The control lever will provide the following typical functions for each specific
attachment if they are connected properly. Operation will be reversed if
incorrectly connected. We recommend reversing the disconnect couplings
on the hoses that are supplied with the attachment if operation is reversed.
Side Tilt Carriage Operation:
• Lever right .................................. tilt right
• Lever left .................................... tilt left
Auger Operation:
• Lever right .................................. auger dig
• Lever left .................................... auger retract
Swing Carriage:
• Lever right .................................. swing right
• Lever left .................................... swing left
3 Foot Truss Boom w/Winch
• Lever right .................................. cable extends
• Lever left .................................... cable retracts
Optional Controls
OH0431
OH0451
OH2910
5