SkyTrak 6042 Operation Manual - Manual (Page 100)

98 Model 6042 Origin 2/04
Emergency Operations
6. Replace the failed hydraulic line with a new part.
• Boom Retract Line (1)
• Boom Extend Line (2)
• Boom Lift Line (3)
• Boom Lower Line (4)
7. Check the hydraulic oil level, add oil if needed.
8. Remove the blocking or support from the outer boom.
9. Return to the cab, fasten your seat belt and start the engine.
10. Tilt the carriage and/or attachment upward if necessary for clear-
ance before retracting the boom.
11. Slowly retract the boom.
12. Slowly lower the boom and ground the carriage and/or attachment.
13. Shut off the engine.
14. Completely remove the load from the carriage and/or attachment if
you haven’t already done so.
15. Return to the cab, fasten your seat belt and start the engine.
16. Cycle the lift/lower and extend/retract cylinders several times to
bleed air from the system. Check for leaks.
17. Recheck the hydraulic oil level. Add oil if necessary.