SkyTrak 6042 Operation Manual - Manual (Page 25)

Operation
23 Model 6042 Origin 2/04
Operation
Accelerator Pedal
Pressing down the accelerator pedal (8) increases engine and hydraulic
speed of the vehicle. The pedal is spring-loaded to return to idle speed.
Service Brake Pedal
Pressing down the brake pedal (9) decreases the speed of the vehicle by
applying the service brakes located in the axles. In the event of engine
power loss, the service brake pedal can also be used for braking. It also
activates and locks the rear axle to frame lock system when boom angles
are greater than 40°, as long as it is depressed.
Steering Wheel
Turning the steering wheel (10) to the left or right steers the vehicle in the
corresponding direction. Any one of the steering modes are selectable.
Refer to “Steering Select Switch” on page 25.
Horn Button
Pressing the horn button (11) in the center of the steering wheel sounds the
horn.
Operator Controls
OH1760
8
10
9
11