C. hydraulic oil & filter change, First 50 hours), Filter only) – SkyTrak 6042 Operation Manual User Manual
Page 137: General maintenance
General Maintenance
135
Model 6042
Origin 2/04
C. Hydraulic Oil & Filter Change
(First 50 Hours)
(Filter Only)
(1000 Hour Intervals)
(Oil & Filter)
Change the hydraulic oil filter after the first 50 hours of operation and
change the hydraulic oil and filter every 1000 hours of operation thereafter.
Other than the 1000 hour interval, the hydraulic oil must be changed when a
hydraulic component has contaminated the system.
1. Level the vehicle, ground the carriage, place travel select lever in
(N) NEUTRAL, move the neutral lock lever to NEUTRAL LOCK
position, engage the parking brake switch.
2. Fully retract all cylinders and shut OFF the engine.
3. Remove the four capscrews (6) holding the hydraulic oil tank cover
(7) to the tank (8), remove the cover.
50
1000
OT08402
OS08402
OH2670
OH2690
OH1920
7
6
6
8