SkyTrak 6042 Operation Manual - Manual (Page 181)

Test Procedures
179 Model 6042 Origin 2/04
If the vehicle does not drive “straight,” the steering could be out-of-phase.
Perform the following Four Wheel Steer Indexing Procedure to synchronize
the front and rear steering.
1. With the steering select switch (4) in the Four Wheel Steer position
(5), turn the steering wheel full left.
2. While holding the steering wheel full left, toggle the steer select
switch to the Front Wheel Steer position (6) and steer the front
wheels back to center.
3. Toggle the steer select switch back to Four Wheel Steer position (5)
and turn the steering wheel full left.
4. Toggle the steer select switch back to Front Wheel Steer position
(6) and steer the front wheels full left.
5. Toggle the switch to the Four Wheel Steer position (5) and return to
center.
The vehicle should now be properly indexed in Four Wheel Steering. If the
wheels are still out-of-phase, repeat the above procedure.
Four Wheel Steer Indexing Procedure
OH3200
6
5
4