SkyTrak 10054 Operation Manual - Manual (Page 43)

Section 3 - Controls and Indicators
3-3 31200352
Dash Controls and Indicators
1. Park Brake Switch: See page 3-7 for details.
2. Frame Level Indicator: Enables operator to determine the left to right level
condition of the telehandler.
3. Hazard Light Switch (if equipped): On/Off switch.
4. Work Light Switch (if equipped): Three position switch. Push top of switch to
turn all work lights on. Move switch to middle position to turn on front and boom
worklights. Push bottom of switch to turn off all work lights.
5. Engine Air-Intake Heater Indicator (6036 & 6042, if equipped),
(8042, 10042 & 10054): Illuminates with ignition key in the “RUN” position.
Indicator goes out when start temperature is reached. At temperatures below
40° F (4° C), do not start until light goes out.
6. Engine Function Indicators: See page 3-5 for details.
7. Windshield Wiper Switch (if equipped): Three position switch. Push bottom of
switch to operate wiper at high speed. Move switch to middle position to operate
wiper at low speed. Push top of switch to turn off wiper.
8. Skylight Wiper Switch (if equipped): On/Off switch.
9. Windshield and Skylight Washer Switch (if equipped): Push and hold bottom of
switch to activate washer.
10. Steer Select Switch: Three positions: 4-wheel circle steer, 4-wheel crab steer
and 2-wheel steer. See page 3-15 for details.
11. Beacon Light Switch (if equipped): On/Off switch.
12. Temperature Control Switch (if equipped): Adjustable rotary switch
13. Fan Speed (if equipped): Four-position rotary switch.
14. Instrument Cluster: See page 3-4 for details.
OH3801
P
3 4 5 6
9
2
10 11 8 7
1
14
13 12