SkyTrak 10054 Operation Manual - Manual (Page 42)

Section 3 - Controls and Indicators
3-2 31200352
3.2 CONTROLS
1. Transmission Control Lever: See page 3-8.
2. Dash Controls and Indicators: See page 3-3.
3. Steering Wheel: Turning the steering wheel to the left or right steers the
machine in the corresponding direction. Three steering modes are available.
See “Steer Modes” on page 3-15.
4. Horn: Depress button to sound horn.
5. Accessory Control Lever (if equipped): See page 3-14.
6. Boom Joystick: See page 3-10.
7. Frame Level and Attachment Tilt Joystick: See page 3-11.
8. Outrigger Switches (10042 & 10054): See page 3-13.
9. Auxiliary Hydraulic Joystick: See page 3-12.
10. Accelerator Pedal: Pressing down the pedal increases engine and hydraulic
speed.
Accelerator pedal also used to activate Cummins ECM diagnostic system. See
Service Manual for details.
11. Service Brake Pedal: The further the pedal is depressed, the slower the travel
speed.
(6042, 8042, 10042 & 10054 Only) With service brake pedal depressed and
boom angles above 40°, the locked mode of the Stabil-Trak system is activated.
See page 3-16.
12. Ignition Switch: Key activated. See page 3-6.
OH3791
1
2
3
6
7
8
9
10
12
4
5
11