6 :system subsystem, 7 [:system:communicate] subsystem – BNC 7000 Series Programmer Manual User Manual
Page 29

29
:QUEStionable:PTR
:STATus:QUEStionable:PTR
This command sets the positive transition filter of the questionable status event register.
:QUEStionable:NTR
:STATus:QUEStionable:NTR
This command sets the negative transition filter of the questionable status event register.
5.6 :SYSTem Subsystem
Command
Parameters
Unit
(default)
Remark
:SYSTem:ERRor[:NEXT]?
FW 1.0
:SYSTem:PRESet
FW 1.0
:SYSTem:VERSion?
FW 1.0
:ERRor?
:SYSTem:ERRor[:NEXT]?
Return Parameters: Integer error number
Query command is a request for the next entry in the instrument’s error queue. Error messages in the
queue contain an integer in the range [–32768, 32768] denoting an error code and associated
descriptive text.
:PRESet
:SYSTem:PRESet
Resets most instrument functions to factory- defined conditions. This command is similar to the *RST
command.
:VERSion?
:SYSTem:VERSion?
Returns the SCPI version number that the instrument software complies with [1999.0]
5.7 [:SYSTem:COMMunicate] Subsystem
Command
Parameters
Unit (default)
:SYSTem:COMMunicate:LAN:CONFig
DHCP|MANual|AUTO
DHCP
:SYSTem:COMMunicate:LAN:DEFaults
:SYSTem:COMMunicate:LAN:DHCP:TIMeout
30 sec
:SYSTem:COMMunicate:LAN:DOMain
Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901
Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com